I-Plastiki-steel Sprocket Turning Conveyor roller |Isithombe Esifakiwe se-GCS

I-Plastiki-steel Sprocket Turning Conveyor roller |I-GCS

Incazelo emfushane:

Amarola ochungechunge aphendukayo 1142C

I-Plastiki-steel sprocket turnings
I-cylinder yangaphakathi yenziwe ngama-roller angu-1120 (ipayipi ububanziΦ50), kanye nomkhono we-taper wepulasitiki, i-taper evamile ingu-3.6 °, futhi ibhande elinezimbambo eziningi liyaqhutshwa.

I-GLOBAL CONVEYOR SUPPLIES(GCS) Ihlinzeka ngamarola adonsela phansi adonsela phansi, ama-sprocket roller, ama-grooved roller, nama-tapered roller, atholakala ngosayizi abaningi ngokucushwa okuningi okuhlukile.Izinketho zokuthwala eziningi, izinketho zedrayivu, izesekeli, izinketho zomhlangano, ama-coatings, nokunye kusivumela ukuthi sikwazi ukuhlalisa cishe noma yiluphi uhlelo lokusebenza.Amarola angakhelwa ngokwezifiso amazinga okushisa okweqile, imithwalo esindayo, isivinini esikhulu, angcolile, agqwalile, nezindawo zokugeza.
Inhloso yethu ukuhlinzeka ngerola ezohlala isikhathi eside, isebenze kangcono, futhi yakhelwe kunoma yimuphi usayizi odingwa yikhasimende.Sifuna ukuba yisitolo sakho sokuma okukodwa kuzo zonke izixazululo zakho zamarola okuthutha.

Thumela i-imeyili kithi Landa njenge-PDF

Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Irola yePlastiki yensimbi ye-Sprocket Turning Conveyor

Isici

I-plastic-steel double-chain turning conveyor roller ilungele ukudlulisa izinto ezilula neziphakathi.

Kusetshenziswa amarola e-plastic-steel sprocket roller, futhi kufakwa imikhono ye-taper yepulasitiki ukuze kubonakale umsebenzi wokujika wama-sprockets ensimbi.

I-PVC Cone Sleeve Roller, ngokwengeza umkhono oyindilinga (i-PVC) kurola evamile, izinhlobo ezihlukahlukene zezixube eziphendukayo zingenziwa ukuze kubonakale ukudlulisa okugobile.I-taper evamile ingu-3.6 °, i-taper ekhethekile ayikwazi ukwenziwa ngezifiso.

Steel Isigaxa roll, usayizi non-standard, ububanzi lokushisa ububanzi, kungenziwa ngezifiso steel Isigaxa roll.I-taper evamile engu-3.6° ingasetshenziswa, kanti amanye ama-taper angenziwa ngokwezifiso.

Idatha Ejwayelekile

Ihambisa umthwalo	Okubalulekile okukodwa≤100KG
Isivinini esiphezulu	0.5m/s
Izinga lokushisa	-5°℃~40°c

Izinto zokwakha

Izindlu zokuzala	Plastic carbon steel izingxenye
Ukuvala i-cap yokugcina	Izingxenye zepulasitiki
Shaya ucingo	Insimbi ye-carbon
I-roller surface	Ipulasitiki

Isakhiwo

Imingcele ye-Sprocket
I-Sprocket	a1	a2	a3
08B14T	18	22	18.5

Ithebula lepharamitha ye-Taper Sleeve
Ubude be-Taper Sleeve (WT)	I-Taper Sleeve Diameter (D1)	I-Taper Sleeve Diameter (D2)
300	Φ56	Φ74.9
350	Φ52.9	Φ74.9
400	Φ56	Φ81.1
450	Φ52.9	Φ81.1
500	Φ56	Φ87.4
550	Φ52.9	Φ87.4
600	Φ56	Φ93.7
650	Φ52.9	Φ93.7
700	Φ56	Φ100
750	Φ52.9	Φ100
800	Φ56	Φ106.3
850	Φ52.9	Φ106.3

Ithebula lepharamitha yokukhetha

I-Tube Dia	Ubukhulu beshubhu	I-Shaft Dia	Umthwalo omkhulu	Ububanzi bebakaki	I-Sprocket	Ubude be-Shaft L	Okubalulekile			Isibonelo sokukhetha	Izidingo ezikhethekile
D	t	d		BF		(Intambo yesifazane)	Insimbi ifakwe zincplated	Insimbi engagqwali	I-Aluminium	Ububanzi bangaphandle 50mm Shaft ububanzi 12mm	Ubude bomkhono we-taper 300mm
							AO	B1	CO	Ubude be-roller surface 400mm
Φ50	1.5	Φ12/15	100KG	W+64	08B14T	W+64	✓	✓	✓	Insimbi engagqwali 201, intambo yesifazane 1142C.50.12.400.B.10