Imikhiqizo
Isigaxa se-roller nge-groove ye-conveyor roller
Isigaxa roller nge-groove
Ubuso
I-1012 Series Double "O" Groove Series Rulers isetshenziswa njengesakhiwo esiyisisekelo, futhi imikhono ye-tater yepulasitiki yengezwa ukuze ifeze umsebenzi we- "O" Belt Drive Turn.
Ilungele ukuvela kokukhanya komthwalo.
I-PVC Isigaxa Sleeve Roller, ngokungeza i-conical Sleeve (PVC) kwi-roller ejwayelekile, izinhlobo ezahlukahlukene zama-mixers ezijikayo zenziwe ukuze zikwazi ukubona okugoqekile. I-Standard Taper ngu-3.6 °, i-taper ekhethekile ayinakwenziwa ngokwezifiso.
I-Steel Isigaxa roll, usayizi ongewona ojwayelekile, uhla lokushisa olubanzi, lungenziwa ngokwezifiso zensimbi yensimbi. 3.6 ° I-Standard Taper ingasetshenziswa, kanti amanye amaphepha nawo angenziwa ngokwezifiso.
Imininingwane ejwayelekile
| Ukudlulisela umthwalo | Indwangu eyodwa ≤30kg |
| Isivinini esikhulu | 0.5m / s |
| Ububanzi bokushisa | -5 ℃ ~ 40 ° C |
Izinto zokwakha
| Ukuthwala Izindlu | Izingxenye zensimbi epulasitiki |
| Ukuvalwa kokuphela kokugcina | Izingxenye zepulasitiki |
| Memeza | Insimbi yekhabhoni |
| Indawo ye-roller | -Thambile esandleni |
Ukwakheka
| Itafula le-Taper SleeEe Parameter | ||
| Ubude be-Taper Sleeve (wt) | I-Taper Sleeve Ububanzi (D1) | I-Taper Sleeve Ububanzi (D2) |
| 300 | Φ Afrika50 | Φ744.9 |
| 350 | Φ052.9 | Φ744.9 |
| 400 | Φ Afrika50 | Φ81.1 |
| I-450 | Φ052.9 | Φ81.1 |
| 500 | Φ Afrika50 | Φ887.4 |
| I-550 | Φ052.9 | Φ887.4 |
| I-600 | Φ Afrika50 | Φ 933.7 |
| I-650 | Φ052.9 | Φ 933.7 |
| I-700 | Φ Afrika50 | Φ100 |
| Okungama-750 | Φ052.9 | Φ100 |
| 800 | Φ Afrika50 | Φ 106.3 |
| I-850 | Φ052.9 | Φ 106.3 |
Ithebula lepharamitha yokukhetha
| I-Tube Dia | Ukuqina kweshubhu | Shaft Dia | Umthwalo omkhulu | Ububanzi be-bracket | Ukuthola Isinyathelo | Ubude be-Shaft l | Ubude be-Shaft l | Into uqobo lwayo | Isibonelo sokukhetha | Izidingo ezikhethekile | |||
| D | t | d | BF | (Intambo yabesifazane) | Ingcindezi yentwasahlobo | Insimbi ye-zinclated | Insimbi engagqwali | Aluminiyamu | Uhlobo lwenhlanzi | Ububanzi obungaphandle buyisilinganiso se-50mm shaft 12mm | Ubude be-Taper Sleeve 300mm | ||
| AO | B1 | CO | DO | Ubude be-Roller Surface 450mm | |||||||||
| Φ 50 | 1.5 | 11Hex φ8 / 12/15 | I-50kg | W + 10 | W + 9 | W + 10 | W + 31 | [: 0 - | [: 0 - | I-Stainless Steel 201, Thread Thread 1002C.5011.450.0.00 | |||
Izimo:Isikhundla sokuhlunga kwengcindezi ekugcineni kwesigubhu, futhi kuphela amashubhu e-rs50. Umkhono we-tater wepulasitiki angangezwa ukwenza ngokwezifiso i-roller eguqukayo.
