I-GCS'S Eyodwa kunye neDouble Groove Transfer Ethwele iConveyor Roller oMfanekiso obonakalayo

I-GCS'S eNye kunye neDouble Groove Transfer Ethwele i-Conveyor Roller

Inkcazelo emfutshane:

Belt Drive Series Roller 1011/1012

GCS'S Engatshatanga kunye neDouble Groove Transfer CarryingI-Conveyor Belt Roller,

Thenga ihoseyile ye-o yokuhambisa ibhanti kwi-GCS

Umphezulu we-roller ugxininiswe ngokuthe ngqo kwi-groove kwaye uqhutywe yibhande elithi "O", elisetyenziselwa ukuhanjiswa kwe-medium and low-speed yezinto ezilayishwe ukukhanya, iibhokisi zezinto eziphathekayo, njl.

Thumela i-imeyile kuthi Khuphela njengePDF

Iinkcukacha zeMveliso

Iithegi zeMveliso

Uphawu

Umphezulu we-roller ucinezela i-"O" groove, kwaye ukuhanjiswa kuphunyezwa ngebhanti "O".
Amacandelo eplastiki achanekileyo asetyenziswayo ekupheleni, ukusebenza okuzinzileyo;isakhiwo esilula, ukufakwa lula, i-anti-static;
Kukho i-deformation ethile kwinkqubo ye-grooving ye-roller, kwaye ixabiso le-ruout likhulu kancinane kune-non-groove roller.

Idatha ngokubanzi

Ukuhambisa umthwalo	Imathiriyeli enye≤30KG
Esona santya siphezulu	0.5m/s
Uluhlu lobushushu	-5℃~40℃

Izinto eziphathekayo

Ukuthwala izindlu	Izinto zeplastiki kunye nekhabhoni yentsimbi
Ukutywinwa kokuphela kwecap	Amacandelo eplastiki
Ibhola	Intsimbi yekhabhoni
Umphezulu we-roller	Intsimbi / iAluminiyam

Isicelo seMveliso

1011 Roller

Ityhubhu Dia	Shaft dia (d)	G (Yenzelwe)	d1
Φ48.6	11hex, Φ10/12	65	Φ37.5
Φ50	11hex, Φ8/10/12	65	Φ38.5
Φ60	11hex, Φ10/12	65	Φ48.0

1012 Roller

Ityhubhu Dia	Shaft dia (d)	G1 (Yenzelwe wena)	G2	d1
Φ48.6	11hex, Φ10/12	35	30	Φ37.5
Φ50	11hex, Φ8/10/12	35	30	Φ38.5
Φ60	11hex, Φ10/12	35	30	Φ48.0

1011/1012 Itheyibhile yokukhetha ipharamitha

Ityhubhu Dia	Ubukhulu betyhubhu	Shaft Dia	Ubuninzi bomthwalo	Ububanzi besibiyeli	Ukufumana inyathelo	Ubude beShaft L	Ubude beShaft L	Izinto eziphathekayo			Ukukhethwa kwesampulu
D	t	d		BF	(iflethi yokugaya) E	(Intambo yabasetyhini)	Uxinzelelo lwasentwasahlobo	Intsimbi yenziwe ngesinyithi	Yenziwe ngentsimbi eshayinayo	Aluminiyam	OD 50mm Shaft dia 11mm
											Umbhobho Ubude 600mm
Φ48.6	1.5	11hex, Φ10/12	120KG	W+10	W+9	W+10	W+31	✓	✓		Intsimbi enecala eliphindwe kabini legalvanized press fit fit
Φ50	1.5	11hex, Φ8/10/12	120KG	W+10	W+9	W+10	W+31	✓	✓		1011.50.11.600.A100 (Igrooved enye)
Φ60	2.0	11hex, Φ10 /12	160KG	W+10	W+9	W+10	W+31	✓	✓		1012.50.11.600.A100 (I-grooved kabini)

Amanqaku: Indawo yegroove kunye nobungakanani bunokwenziwa ngokwezifiso;ityhubhu ye-Φ50 inokugqunywa ngerabha ethambileyo eyi-2mm;i-Φ50 ityhubhu inokongezwa kunye nomkhono weplastiki we-taper, kunye ne-roller yokujika ingenziwa ngokwezifiso

Ngaphambili: Iirola zomxhuzulane ezilungiselelwe wena ezivela kwimizi-mveliso enegama le-GCS

Okulandelayo: Iirola eziqhutywayo “O” Belt Gravity Roller |Umvelisi we-GCS

Bhala umyalezo wakho apha kwaye uwuthumele kuthi