Lihlahisoa
"O" lebanta roller curve conveyor e loketse bakeng sa ho tsamaisa thepa e bobebe
”O“ lebanta la Curve Tapered Roller le Plastic Sleeve Turning Roller |GCS
Sebopeho
Ho sebelisa 1110 letoto la lirolara tse se nang matla joalo ka sebopeho sa mantlha, ho eketsa sleeve ea taper ea polasetiki ho hlokomela "O" mofuta oa ho fetola lebanta la koloi;
E ka nkela sebaka sa 1012C series grooving roller ho fetola le ho fokotsa runout.
PVC Cone Sleeve Roller, ka ho kenyelletsa letsoho la conical (PVC) ho rolara e tloaelehileng, mefuta e fapaneng ea li-mixer tse retelehang li ka etsoa ho hlokomela phepelo e kobehileng.Taper e tloaelehileng ke 3.6 °, taper e khethehileng e ke ke ea etsoa ka mokhoa o ikhethileng.
Moqolo oa tšepe oa tšepe, boholo bo sa tloaelehang, mefuta e mengata ea mocheso, e ka etsoa ka mokhoa o ikhethileng oa tšepe ea tšepe.Taper e tloaelehileng ea 3.6 ° e ka sebelisoa, 'me li-taper tse ling le tsona li ka etsoa ka mokhoa o ikhethileng.
Lintlha tse akaretsang
| Ho tsamaisa mojaro | Boitsebiso bo le bong ≤30KG |
| Lebelo le phahameng | 0.5m/s |
| Boemo ba mocheso | -5 ℃ ~ 40°C |
Lisebelisoa
| Ho jara matlo | Likarolo tsa tšepe ea polasetiki ea carbon |
| Qetello ea ho tiisa | Likarolo tsa polasetiki |
| Letsa | Tšepe ea carbon |
| Roller bokaholimo | Plastiki |
Sebopeho
| Letlapa la Parameter ea Taper Sleeve | ||
| Bolelele ba letsoho la taper (WT) | Diameter ea Sleeve ea Taper (D1) | Diameter ea Sleeve ea Taper (D2) |
| 300 | Φ56 | Φ74.9 |
| 350 | Φ52.9 | Φ74.9 |
| 400 | Φ56 | Φ81.1 |
| 450 | Φ52.9 | Φ81.1 |
| 500 | Φ56 | Φ87.4 |
| 550 | Φ52.9 | Φ87.4 |
| 600 | Φ56 | Φ93.7 |
| 650 | Φ52.9 | Φ93.7 |
| 700 | Φ56 | Φ100 |
| 750 | Φ52.9 | Φ100 |
| 800 | Φ56 | Φ106.3 |
| 850 | Φ52.9 | Φ106.3 |
Khetho ea Parameter Tafole
| Tube Dia | Botenya ba tube | Shaft Dia | Boholo ba mojaro | Bophara ba bracket | Mohato oa ho fumana | Shaft Length L | Shaft Length L | Lintho tse bonahalang | Mohlala oa khetho | Litlhoko tse khethehileng | ||
| D | t | d |
| BF |
| (Khoele ea basali) | Khatello ea selemo | Tšepe e entsoeng ka zincplated | Ts'epe e sa beng le mabali | Aluminium | Ka ntle bophara 50mm Shaft bophara 11mm | Bolelele ba letsoho la taper ke 300mm |
|
|
|
|
|
|
|
|
| AO | B1 | CO | Bolelele ba holim'a roller 450mm |
|
| Φ50 | 1.5 | 11hex Φ8/12/15 | 50KG | W+36 | W+35 | W+36 | W+57 | ✓ | ✓ | ✓ | Tšepe e sa hloekang 201, khoele ea basali 1002C.5011.450.0.00 |
|
Maikutlo:feela bakeng sa li-tubes tsa Φ50, e ka eketsa matsoho a likhoune tsa polasetiki, lirolara tse tloahelehileng.
-
Multi wedge pulley drive conveyor roller wholesale
-
Lirolara tse khannoang "O" Belt Gravity Rol...
-
Drive roller O-ring conveyor roller e nang le groove
-
Conical roller e nang le kopano ea setulo sa nylon
-
Ho khanna Conveyor Roller e nang le Multi Wedge pulley...
-
GCS'S Single and Double Groove Transfer C...
