Ngwaahịa
Poly-Vee ịnya ụgbọ ala na-atụgharị Roller |GCS
Poly-Vee ịnya ụgbọ ala na-atụgharị Roller
Njirimara
A na-eji 1120 serie poly vee roller dị ka ntọala ntọala, a na-agbakwunyekwa aka uwe rọba plastik iji ghọta ọrụ ntụgharị poly vee belt drive.
PVC Cone Sleeve Roller, site na ịtinye aka uwe conical (PVC) na rola a na-emebu, enwere ike ịme ụdị igwe igwe dị iche iche iji nweta mbufe agbagọ.Standard taper bụ 3.6°, pụrụ iche taper enweghị ike ahaziri.
Mpempe akwụkwọ mpịakọta ígwè, nha na-abụghị ọkọlọtọ, oke okpomọkụ, enwere ike ịhazi mpịakọta ígwè cone.Enwere ike iji taper ọkọlọtọ 3.6°, enwere ike ịhazi tapers ndị ọzọ.
Data izugbe
| Na-ebufe ibu | Otu ihe ≤7OKG Ọsọ kacha 0.5m/s |
| Ọsọ kacha | 0.5m / s |
| Oke okpomọkụ | -5 ℃ ~ 40 ℃ |
Akụrụngwa
| Ime ụlọ | Plastic carbon ígwè components |
| Okpu ngwụcha akara | Ngwa plastik |
| Kpọọ | Carbon ígwè |
| Roller elu | Plastic |
Nhazi
| Tebụl Parameter Sleeve Taper | ||
| Ogologo aka Taper (WT) | Dayameta Sleeve Taper (D1) | Dayameta Sleeve Taper (D2) |
| 300 | Φ56 | Φ74.9 |
| 350 | Φ52.9 | Φ74.9 |
| 400 | Φ56 | Φ81.1 |
| 450 | Φ52.9 | Φ81.1 |
| 500 | Φ56 | Φ87,4 |
| 550 | Φ52.9 | Φ87,4 |
| 600 | Φ56 | Φ93.7 |
| 650 | Φ52.9 | Φ93.7 |
| 700 | Φ56 | Φ100 |
| 750 | Φ52.9 | Φ100 |
| 800 | Φ56 | Φ106.3 |
| 850 | Φ52.9 | Φ106.3 |
Okpokoro Oke Nhọrọ
| Tube Dia | Ọkpụrụkpụ tube | Shaft Dia | Ibu kacha | Obosara mgbodo | Ịchọta nzọụkwụ | Ogologo Shaft L | Ogologo Shaft L | Ihe onwunwe | Ihe atụ nhọrọ | Ihe achọrọ pụrụ iche | ||
| D | t | d |
| BF |
| (eriri nwanyi) | Mmiri | Nchara zincplated | Igwe anaghị agba nchara | Aluminom | Mpụga dayameta 50mm Shaft dayameta 11mm | Ogologo aka uwe taper 300mm |
|
|
|
|
|
|
|
|
| AO | B1 | CO | Roller elu ogologo 350mm |
|
| Φ50 | 1.5 | 11hex Φ8/12/15 | 50KG | W+36 | W+35 | W+36 | W+57 | ✓ | ✓ | ✓ | Igwe anaghị agba nchara 201, eri nwanyị 1002C.5011.450.0.00 | |
Okwu:naanị maka tubes Φ50, nwere ike ịgbakwunye akwa cone plastik, rollers na-atụgharị omenala.
