Ngwaahịa
Cone Roller nwere oghere maka ihe mkpuchi ebu
Cone Roller nwere oghere
Njirimara
A na-eji usoro 1012 okpukpu abụọ nke “O” groove series rollers dị ka ihe bụ isi, a na-agbakwunyekwa aka uwe plastik iji ghọta ọrụ ntụgharị “O” belt mbanye.
Kwesịrị ekwesị maka ibufe ihe ibu dị mfe.
PVC Cone Sleeve Roller, site na ịtinye aka uwe conical (PVC) na rola a na-emebu, enwere ike ịme ụdị igwe igwe dị iche iche iji nweta mbufe agbagọ.Standard taper bụ 3.6°, pụrụ iche taper enweghị ike ahaziri.
Mpempe akwụkwọ mpịakọta ígwè, nha na-abụghị ọkọlọtọ, oke okpomọkụ, enwere ike ịhazi mpịakọta ígwè cone.Enwere ike iji taper ọkọlọtọ 3.6°, enwere ike ịhazi tapers ndị ọzọ.
Data izugbe
| Na-ebufe ibu | Otu ihe ≤30KG |
| Ọsọ kacha | 0.5m / s |
| Oke okpomọkụ | -5 ℃ ~ 40 ℃ |
Akụrụngwa
| Ime ụlọ | Plastic carbon ígwè components |
| Okpu ngwụcha akara | Ngwa plastik |
| Kpọọ | Carbon ígwè |
| Roller elu | Plastic |
Nhazi
| Tebụl Parameter Sleeve Taper | ||
| Ogologo aka uwe ogologo (WT) | Dayameta Sleeve Taper (D1) | Dayameta Sleeve Taper (D2) |
| 300 | Φ56 | Φ74.9 |
| 350 | Φ52.9 | Φ74.9 |
| 400 | Φ56 | Φ81.1 |
| 450 | Φ52.9 | Φ81.1 |
| 500 | Φ56 | Φ87,4 |
| 550 | Φ52.9 | Φ87,4 |
| 600 | Φ56 | Φ93.7 |
| 650 | Φ52.9 | Φ93.7 |
| 700 | Φ56 | Φ100 |
| 750 | Φ52.9 | Φ100 |
| 800 | Φ56 | Φ106.3 |
| 850 | Φ52.9 | Φ106.3 |
Okpokoro Oke Nhọrọ
| Tube Dia | Ọkpụrụkpụ tube | Shaft Dia | Ibu kacha | Obosara mgbodo | Ịchọta nzọụkwụ | Ogologo Shaft L | Ogologo Shaft L | Ihe onwunwe | Ihe atụ nhọrọ | Ihe achọrọ pụrụ iche | |||
| D | t | d | BF | (eriri nwanyi) | Nrụgide mmiri | Nchara zincplated | Igwe anaghị agba nchara | Aluminom | PVC | Mpụga dayameta 50mm Shaft dayameta 11mm | Ogologo aka uwe taper 300mm | ||
| AO | B1 | CO | DO | Roller elu ogologo 450mm | |||||||||
| Φ50 | 1.5 | 11hex Φ8/12/15 | 50KG | W+10 | W+9 | W+10 | W+31 | ✓ | ✓ | Igwe anaghị agba nchara 201, eri nwanyị 1002C.5011.450.0.00 | |||
Okwu:Ọnọdụ nke oghere nrụgide dị na njedebe nke drum, na naanị maka tubes Φ50.Enwere ike ịgbakwunye akwa taper rọba iji hazie igwe ntụgharị.
