Kayayyaki
90 digiri mai lankwasa mazugi abin nadi
Juyawa mai lankwasa nadi shigarwa:
O-belt rollers
sprocket rollers
madaidaiciya madaidaiciya rollers
Cone Roller tare da tsagi
Siffar
Ana amfani da jerin 1012 mai ninki biyu na "O" a matsayin tsari na asali, kuma ana ƙara hannayen rigar filastik don gane aikin jujjuyawar bel ɗin "O".
Ya dace da isar da kaya mai nauyi.
PVC Cone Sleeve Roller, ta ƙara conical sleeve (PVC) zuwa nadi na al'ada, ana iya sanya nau'ikan mahaɗa daban-daban don fahimtar isar da lanƙwasa.Madaidaicin taper shine 3.6°, taper ta musamman ba za a iya keɓance shi ba.
Karfe mazugi Roll, mara misali size, fadi da zafin jiki kewayon, za a iya musamman karfe mazugi Roll.3.6° daidaitaccen taper za a iya amfani da, da sauran tapers kuma za a iya musamman.
Gabaɗaya Bayanai
| Bayarwa kaya | Single abu ≤30KG |
| Matsakaicin gudu | 0.5m/s |
| Yanayin zafin jiki | -5 ℃ ~ 40 ℃ |
Kayayyaki
| Gidaje masu ɗaukar nauyi | Filastik carbon karfe sassa |
| Ƙarshen rufewa | Abubuwan filastik |
| Kira | Karfe Karfe |
| Nadi surface | Filastik |
Tsarin
| Taper Sleeve Parameter Table | ||
| Tsawon hannun riga (WT) | Diamita Taper Sleeve (D1) | Diamita Taper Sleeve (D2) |
| 300 | Φ56 | Φ74.9 |
| 350 | Φ52.9 | Φ74.9 |
| 400 | Φ56 | Φ81.1 |
| 450 | Φ52.9 | Φ81.1 |
| 500 | Φ56 | Φ87.4 |
| 550 | Φ52.9 | Φ87.4 |
| 600 | Φ56 | Φ93.7 |
| 650 | Φ52.9 | Φ93.7 |
| 700 | Φ56 | Φ100 |
| 750 | Φ52.9 | Φ100 |
| 800 | Φ56 | Φ106.3 |
| 850 | Φ52.9 | Φ106.3 |
Teburin Siffar Zaɓa
| Tube Dia | Kaurin tube | Shaft Dia | Mafi girman kaya | Faɗin sashi | Gano mataki | Tsawon Shaft L | Tsawon Shaft L | Kayan abu | Misalin zaɓi | Bukatu na musamman | |||
| D | t | d | BF | (Zaren mace) | Matsi na bazara | Karfe zincplated | Bakin Karfe | Aluminum | PVC | Outer diamita 50mm Shaft diamita 11mm | Taper sleeve tsawon 300mm | ||
| AO | B1 | CO | DO | Roller surface tsawon 450mm | |||||||||
| Φ50 | 1.5 | 11hex % 8/12/15 | 50KG | W+10 | W+9 | W+10 | W+31 | ✓ | ✓ | Bakin Karfe 201, Zaren Mata 1002C.5011.450.0.00 | |||
Bayani:Matsayin matsa lamba yana a ƙarshen drum, kuma kawai don Φ50 tubes.Ana iya ƙara hannun rigar filastik don keɓance abin nadi.
-
Karfe Sprocket Roller don isar da gogayya
-
90 digiri PVC mai lankwasa mazugi abin nadi conveyor
-
Sarka mai ɗaukar abin nadi da aka danna cikin abin nadi
-
Na'ura mai ɗaukar nauyi, abin nadi mai lanƙwasa tare da roƙon sprocket ...
-
Karfe sprockets daidaitaccen abin nadi na karfe
-
Roller na Gravity tare da Sprockets Karfe a Stationa...
